|
|
NECROPSY TABLE
[0A800]
|
NECROPSY TABLE
REFURBISHED
Price from $6,000.00
The 0A800 Workstation as shown is ventilated with Mopec’s Total Downdraft System. An integrally constructed sink is provided in the end of the table opposite where the ventilation connects. The sink is 20” W x 11” L x 10” D and provided with an additional hot/cold water faucet. The tables are designed to provide a safe and effective vented workstation for necropsy and trimming. This air movement is unique in that it moves air in a consistent manner throughout the work surface.
Perimeter Rinse Fixture: A perimeter rinse fixture is provided which consists of a cold water control valve, vacuum breaker protection and stainless steel water manifold. When the water is turned on, a flood of water continuously rinses the sink well which helps eliminate build up of fluids within the downdraft chamber.
Electrical Receptacle: Two, G.F.C.I. Protected watertight electrical receptacle, 115/1/60.
Construction: The construction is superior utilizing TIG welding on all seams and mating sections, which are then ground smooth and regrained to match the #4 satin factory finish. All internal plumbing and electrical lines are factory installed and tested.
Hot/Cold Fixture: At each end of the table a hot/cold fixture is provided with wrist blade handles, large swing spout faucet with vacuum breaker protection.
Dimensions: 96” L (243.84cm) x 30” W (76.2cm) x 37” H (93.98cm)
|
|
|
This item can not be ordered online. Please call or email with any queries.
|
|
|
